FitnessForums
Tension adjustment not working - Printable Version

+- FitnessForums (https://www.fitnessforums.net)
+-- Forum: Equipment (https://www.fitnessforums.net/Forum-Equipment)
+--- Forum: Technical Questions (https://www.fitnessforums.net/Forum-Technical-Questions)
+--- Thread: Tension adjustment not working (/Thread-Tension-adjustment-not-working)



Tension adjustment not working - SKLAS - 11-22-2017

We have a Schwinn SRB-1800 recumbent exercise Bike.  It has served us well for many years.  Recently the tension adjustment began to respond erratically, and has now completely stopped.  I can see the resistance motor trying to move every now and again.  I'm fairly certain the resistance motor (p/n:  13001581) requires replacement.  Unfortunately this part appears to be no longer available.   
Can anyone tell me if I can replace the motor with a manual aftermarket lever or knob of some kind?   I'm thinking something must be available that would be similar to a bike gear changing mechanism that could be mounted on or near the control panel, it would have a cable running down to move the magnet assembly back and forth.  I realize that the control panel would no longer "know" what the resistance level is... but that does not concern me..  

Best Regards, 
Stan Klassen


RE: Tension adjustment not working - Welsh - 06-20-2018

Can anyone tell me if I can replace the motor with a manual aftermarket lever or knob of some kind?   I'm thinking something must be available that would be similar to a all you can eat sushi buffet near me  bike gear changing mechanism that could be mounted on or near the control panel,


RE: Tension adjustment not working - Jeffrey A - 07-16-2018

This https://customessaysreviews.com/ page is unique and helpful as well. The information posted here always very accurate and exact related to every information. Also this is so great that every user here is very much active and always involved in every discussion.