02-27-2012, 10:56 AM
Hello,
Wondering if you geniuses may be able to help
We are after a replacement axle for this Johnny G Model Spinner.
We can only presume its an older model as the bottom bracket is not a screw in job.
Its the larger press fit type that is commonly used on older BMX's
It has a 3 piece crank square taper. The Sprocket is welded to the axle itself.
The axle has threads on it where the lock nuts sit that hold the bearing cones in place.
The axle has snapped so we need a replacement axle, preferably one with a new sprocket already welded to it so we can just swap the parts.
Can any one help us?
Thanks in advance..
Wondering if you geniuses may be able to help
We are after a replacement axle for this Johnny G Model Spinner.
We can only presume its an older model as the bottom bracket is not a screw in job.
Its the larger press fit type that is commonly used on older BMX's
It has a 3 piece crank square taper. The Sprocket is welded to the axle itself.
The axle has threads on it where the lock nuts sit that hold the bearing cones in place.
The axle has snapped so we need a replacement axle, preferably one with a new sprocket already welded to it so we can just swap the parts.
Can any one help us?
Thanks in advance..